Skip to main content

Contrary to popular belief, you can install solar panels on tile roofs. While it does require a bit more work, it’s definitely doable. In this blog post, we’ll walk you through the process of installing solar panels on a tile roof. Let’s get started!

There are many different ways to install solar panels on your roof, depending upon what material and pitch you have. To get the most out of them, though, it is important that they are fitted correctly. If you have a flat roof, you’re in the best position imaginable to use free-standing frames to maximize sun exposure. Meanwhile, L brackets drilled into metal or tin rooftops provide a secure installation with protection against rain damage. A properly installed solar panel system will provide the maximum energy regardless of the type of roof it is installed on.

The most common method for installing solar panels on tiled roofs is to attach mounting brackets to the rafters and secure the panels with a rail system. Despite the fact that tiles must be moved, altered, and replaced during installation, the process is significantly less intrusive than you may believe. With careful planning and execution, the installation of solar panels on tiled rooftops is quick and effective.

How to Fix Solar Panels to Tiled Roofing

Pre-Installation Inspection and Measurement

Measurements are the first step in a proper installation. Installers will look at your roof either remotely or in-person to figure out where to put the solar panels based on how much space is available, how steep your roof is, and which way it faces. Here, measurements will be taken to determine where the brackets and rail system will be installed. The inverter and wiring have been properly fitted after a roof inspection has been completed.

Removing Tiles

In response to the question, “How are solar panels installed on tile roofs?” The first steps differ slightly from how they are installed on other types of roofs. When the installers ascend your roof for the first time, they will begin to remove specific tiles in order to attach the mounting brackets. Depending on the size of your solar panels and the required length of the railing, the installation crew will remove tiles to access the rafters and roof structure. The installers may also make minor modifications to the roof cavity to provide more attachment points for the brackets.

Fitting the Mounting Brackets

Installers will attach stainless steel mounting brackets to the rafters after ensuring proper spacing and dimensions. Once the brackets are installed, the relocated tiles are returned to their original locations. To maintain the structure of the roof and ensure that the tiles are set flat, they will be cut or ground to fit around the new brackets. Your staff will also replace any cracked or damaged tiles.

Skilled installers will ensure that the mounting brackets are tight and that the roof remains waterproof. Solar panel installers will, if necessary, install flashing and waterproofing material around the new brackets.

Installing the Rail System

Once the brackets are fixed, it’s time to put up the rail system. Furthermore, we refer to this as a tile roof solar mount. Rails made of aluminum alloy are put across the roof and attached to the brackets. These rails hold the solar panels in place.

How to Fit Solar Panels to Tiled Roofing Materials

Now that everything has been set up, it’s time to put the solar panels on the roof. Clips that bolt to the edge of the panels and slide into metal rails on the mounting brackets hold the panels in place. If you need to get to the areas under the newly installed panels for maintenance or removal, these brackets make it easy. The solar panels are now safely attached to the roof.

The raised space between the panels and the roof tiles lets air flow and keeps the panels cool in the summer. If you want to learn more about how solar panels cool your roof, we wrote a detailed guide on how the process works.

Connecting the Electrics

We now understand how solar panels are installed on tile rooftops. Let’s have a look at some other aspects of solar panel installation.

As the panels are put in place, the wires that run under them are joined together to make a “string. ” The “string” is fed to the inverter under a tile and through a hole in the roof. Installers will work on more than simply the roof. They will also handle the wiring and electricity. You won’t need to access the inverter once the installation is complete. Unless you need to gather data or perform maintenance. Most modern systems will send all data wirelessly to an app on a smartphone or a platform on the web.

Overall, the installation process shouldn’t take more than a couple of days and won’t require major changes to your home. The only work that needs to be changed is removing and modifying the tiles to install the mounting brackets and make a path for the wiring to the inverter. Most of the time, a small hole is drilled to make a path for the wiring.

If you are considering installing solar panels on your home, be sure to follow these tips to make the process as smooth as possible. Our team of experts at can help with every step of the process, from choosing the right solar panel system for your home to installation and maintenance. Contact us today to learn more about our services and how we can help you go solar!

Leave a Reply